Parameter

Type

Value

Description/Default

Analog AGC (aagc)	Range	100 - 2047	Analog AGC spec.; measured in 0.01 steps, with 100 equivalent to a gain of 1.0 Note: Equivalent to ISO # i.e. 100 = ASA 100 typical = 100
		100 - 100	Default: 100

AC Pwrdown Timeout (acpd)	Range	5 - 65535	Sets the amount of time to sleep on AC power before powering down. (in seconds) typical = 600 (10min)
		5 - 65535	Default: 600

AC Sleep Timeout Enable (acse)	List	1 = Enable 2 = Disable 3 = Never Sleep	Indicates whether or not the AC sleep timeout is enabled. 1 - Enable
			Item 0 - Enable Item 1 - Disable * Item 2 - Never Sleep

AC Timeout (actc)	Range	60 - 4095	AC timeout count in seconds; the inactive time that elapses before the camera powers down when it's connected AC power. typical = 600 (10min)
		5 - 65535	Default: 600

Auto Exposure Lock (aelk)	List	0 = Continuous 1 = AE Lock	Automatic exposure lock mode specification. 0 - Continuous
			Item 0 - AE Lock *

Auto Focus Lock (aflk)	List	0 = Continuous 1 = AF Lock	Automatic focus lock mode specification. 0 - Continuous
			Item 0 - AF Lock *

Aperture Size (aper)	Range	100 - 4095	Aperature spec.; measured in 0.01 stop steps. (400 = f/4) typical = 280 (f/2.8)
		300 - 1600	Default: 560

Burst Capture (bccl)	List	1 = 24-bit color 2 = 8-bit gray	Burst capture options for the bit depth. 1 - 24-bit Color
			Item 0 - Color *

Burst Capture Rate (bccr)	List	1 = 1/sec 2 = 2/sec 3 = 3/sec 5 = 5/sec 10 = 10/sec	Burst capture rate. Note: v.1.5 uses combination of fbti/qbti typical = 10 /sec
			Unsupported parameter

Burst Compression (bcpn)	Range	1 - 6 (Max-None)	Burst capture image compression Not listed
			Item 0 - High Item 1 - Normal Item 2 - Low * Item 3 - Lossless

Burst Capture Size (bsiz)	Range	1 = Full size 2 = 1/4 size 4 = 1/16 size 8 = 1/64 size	Burst capture size. typical = 4 (1/16)
			Item 0 - Standard * Item 1 - Medium Item 2 - High Item 3 - Ultra

Batt Pwrdown Timeout (btpd)	Range	5 - 65535	Sets the amount of time to sleep on battery before powering down. (in seconds) typical = 480 (8min)
		5 - 65535	Default: 480

Batt Sleep Timeout Enable(btse)	List	1 = Enable 2 = Disable	Indicates whether or not the battery sleep timeout is enabled. 1 - Enable
			Item 0 - Enable *

Batt Timeout (bttc)	Range	60 - 1023	Battery timeout measured in seconds; the amount of time that elapses before the camera powers down when it's connected to battery power. typical = 180 (3min)
		5 - 65535	Default: 60

Camera Folder Name (camf)	String	Camera	The name of the folder where images are stored. Null
		Default: DC290_	Current: DC290_

Camera Name (cmne)	String	User Defined	User defined camera name. Null
		Default: DC290	Current: GenesisArt

Copyright String (cprt)	String	User Defined	User copyright string; goes into the image tags. Note: v.1.5 uses ucpt Null
		Read-Only	DC290

Processor Speed (cpus)	Range	Hardware	Specifies the speed of the processor. Defined by hardware. (in 0.01 MHz) typical = 4909 (49.09 MHz)
		Read-Only	6600

Processor Type (cput)	List	1 = Motorola 823 2 = DCAM 101/103	Specifies the type of Processor. Defined by Hardware. Hardware
		Read-Only	1

Counter Reset (crst)	Range	1 = Reset when empty 2 = Capture counter	Counter reset specification. 1 - Reset
			Item 0 - Roll Count Item 1 - Odometer Count *

Short Date Format (deft)	List	1 = MM/DD/YY 2 = DD/MM/YY 3 = YY/MM/DD	Specifies the order of entry for dates in Entry mode and other uses of the short date including Watermarks. 1 = MM/DD/YY
			Item 0 - MM/DD/YY * Item 1 - DD/MM/YY Item 2 - YY/MM/DD

Date Format (dfmt)	List	1 = short 2 = abbreviated 3 = wkday abbrev.	Date Format refer to Table A-5. Based on the set Region Code (rgnc) Table A-7. based on Region Code (rgnc)
			Item 0 - Short Date * Item 1 - Abbreviated Date Item 2 - Long Date

Storage Name (drdn)	String	Any	Default internal storage name; default value is used whenever internal storage is initialized def = Camera
		Read-Only	1

Enable Built-in Scripts(ebrs)	Bits	Not supported by any Digita-enabled device.	Allows hidden scripts to be built into the system. Scripts remain hidden unless enabled via a script. typical = 0x0
		Read-Only	1

Expansion Slots Avail. (exsa)	Range	1 - 3	Specifies the number of expansi slots available. typical = 1
		Read-Only	1

Burst Time Interval (fbti)	Range	100 - 1000	Specifies the time interval between captures for burst capture. typical = 250 msec
		500 - 10000	Default: 500

Focus Dist (fdst)	Range	30 - 65535	Focus distance specification; measured in centimeters, 65535 = infinity. 65535cm (infinty)
		50 - 65535	Default: 300

File Type (flty)	List	32 bit 4 char. Name PICT (.PIC) JFIF (.JPG) EXIF (.EXF)	File type selector used when saving images. 3 - EXF
			Item 0 - EXIF * Item 1 - TIFF

Focus Mode (fmod)	List	1 = Auto 2 = Program 3 = Manual	Focus mode specification. 1 - Auto
			Item 0 - Auto * Item 1 - Manual

Focus Method (fmtd)	List	1 = Auto matrix 2 = Center Spot 3 = Center weighted 4 = Custom	Focus method specification. 1 - Auto
			Item 0 - Multi-spot Auto * Item 1 - Single Spot

Digita Release Date (fwrd)	Range	0 - 0xFFFFFF	Specifies the release date for the installed version of the Digita OE. Units = seconds
			Unsupported parameter

Hint Spec (hint)	List	1 = Auto 2 = Portrait 3 = Landscape 4 = Closeup 5 = Sports	Hint specification. 1 - Auto
			Item 0 - Auto * Item 1 - Panorama

Image Capture Tone (icts)	Range	Not supported by any Digita-enabled device.	Sets the Tone (CrCb) value to be applied to the image. typical = 23609
			Unsupported parameter

Image Head (ihtc)	Range	0 - 63	Image head timeout measured in seconds; the amount of time that elapses before camera powers off the image head and goes into sleep time. typical = 8 sec
		0 - 63	Default: 0

Image Info Version (iirv)	Bits	0 - 63	Specifies the version number used for image information file tags. typical = 0x010001000
		Read-Only	1.0.1

Instant Review (irev)	List	0 = off 1 = on	Instant Review State. 1 - On
		0 - 3000	Default: 300

Image Sharpness Amount (isam)	Range	0 = none Neg. = Softening(unsharpen) Pos. = Sharpening.	Controls sharpening performed when the image is captured. typical = 0
		-25 - 100	Default: 50

Image Sharpness Radius (isra)	Range	0.1 - 10 Units = .1 pixel	Sets sharpening radius for image capture. typical = 0.1
		6553 - 655360	Default: 6553

Image Sharpness Thresh. (isth)	Range	0 - 25 Units = pixels	Sets sharpening threshhold for capture. typical = 4
		0 - 25	Default: 4

Capture Mode (mcap)	List	0 = Still 1 = Burst 2 = Timelapse	Defines manual capture mode. 0 - Still
			Item 0 - Still * Item 1 - Burst Item 2 - Timelapse

Macro In/Out (mcro)	List	0 = Macro out 1 = Macro in	Macro in/out specification; Out indicates macro not in, macro In indicates macro is in position. 0 - Macro out
			Item 0 - Normal *

Host Buffer (mhbs)	Range	10240 - 65535	Maximum host buffer size in bytes; indicates the block of data that can be transferred through one command response to the host. typical = 19200
		10240 - 32768	Default: 19456

Manual Delay Time (mtdy)	Range	1 - 63	Sets manual delay time in 1 second steps. typical = 10 sec
		1 - 60	Default: 10

Digita OE Version (oerv)	Hex	extended BCD	Specifies version of the Digita OE currently running. typical = 0x010000000
		Read-Only	1.0.0

User Password (pasw)	String	Max 31 Chars.	Used to lock out functions in scripts. User Entered
		Default:	Current:

Burst Playback Rate(pbbr)	Range	1 - 10	Burst playback rate in seconds. typical = 3 sec
		1000 - 10000	Default: 3000

Group Playback Rate(pbgr)	Range	1 - 10	Group playback rate in seconds. typical = 3 sec
		1000 - 10000	Default: 3000

Print Brightness (pbrt)	Range	Not supported by any Digita-enabled device.	Sets the relative brightness of the image. typical = 0
			Unsupported parameter

Timelapse Playback (pbtr)	Range	1 - 10	Time-lapse playback rate in seconds. typical = 3 sec
		1000 - 10000	Default: 3000

Patch Count (pchc)	Range	Not supported by any Digita-enabled device.	Specifies how many patches were applied during boot-up. typical = 0
			Unsupported parameter

Print Contrast (pcon)	Range	Not supported by any Digita-enabled device.	Specifies relative adjustment of contrast. typical = 0
			Unsupported parameter

Print Copies (pcpy)	Range	1 - 50	Print copy count specification. typical = 1
			Unsupported parameter

Program Shift (pgms)	Range	-511 - +511	Program shift; measured in 0.01 stop steps. typical = 0
			Unsupported parameter

Print Layout (play)	List	1-4 = 1-4 up 5 = 6 up 6 = 20 up Not currently supported	Sets the relative brightness of the image. 1 = 1 up
			Unsupported parameter

Printer Name (pnam)	Range	1 = PS/Disk 2 = PS/IrDA	Printer Name - whether to create a PS file or send output through IrDA to printer. 1 - (PS/Disk)
			Unsupported parameter

Printer Orient. (port)	Range	1 = Portrait 2 = Landscape	Print Orientation specification 2 - Landscape
			Unsupported parameter

Print Horiz. Shift (posh)	Range	Not supported by any Digita-enabled device.	Adjusts the Horizontal offset for printing. typical = 0
			Unsupported parameter

Print Vert. Shift (posv)	Range	Not supported by any Digita-enabled device.	Adjusts the Vertical offset for printing. typical = 0
			Unsupported parameter

Print Quality (pqly)	List	1 = Best 2 = Better 3 = Good Not currently supported	Adjusts the Quality for printing. 1 = Best
			Unsupported parameter

Print Resize (pres)	List	1 = Fit Within 2 = Fill and Clip 3 = Stretch & Fill Not currently supported	Sets the method used for filling the print rectangle specified by the play parameter. 1 = Fit Within
			Unsupported parameter

Print Sharpness (psam)	Range	Not supported by any Digita-enabled device.	Sets sharpening for print. typical = 0
			Unsupported parameter

Print Saturation (psat)	Range	Not supported by any Digita-enabled device.	Sets the color saturation for the print. typical = 0
			Unsupported parameter

Printer Scale (psci)	Range	1 = Full 2 = 1/2 3 = 1/4 4 = fit page	Print scale specification. 1 - Full
			Unsupported parameter

Printer Selection (psel)	List	Not supported by any Digita-enabled device.	Sets the destination printer. typical = 1
			Unsupported parameter

Print Paper Size (psiz)	List	1 = US Letter 2 = US Legal 3 = A2 4 = A3 5 = A4 6 = 4X6 7 = Hagaki Not currently supported	Specifies the paper size for the printer. 1 = US Letter
			Unsupported parameter

Print Sharpness Radius (psra)	Range	Not supported by any Digita-enabled device.	Sets sharpening radius for print. Standard 'unsharp mask' functionality. typical = 0.1
			Unsupported parameter

Print Sharpness Thresh. (psth)	Range	Not supported by any Digita-enabled device.	Sets sharpening threshhold for print. Std 'unsharp mask' functionality. typical = 4
			Unsupported parameter

Print Paper Type (ptyp)	List	1 = Plain 2 = Coated 3 = Glossy 4 = Transparency Not currently supported	Specifies what kind of paper is being used in the printer. 1 = Plain
			Unsupported parameter

Quarter Burst Time Int. (qbti)	Range	100 - 1000	Specifies the time interval between captures for 1/4 size burst capture. typical = 250 msec
		360 - 10000	Default: 360

RAM Disk Size (rdsz)	Range	Not supported by any Digita-enabled device.	Sets the size of the internal RAM disk (in sectors). typical = 0 sectors
			Unsupported parameter

Region Code (rgnc)	List	1 = U.S. English 2 = U.K. English 3 = French 4 = Italian 5 = Spanish 6 = German 7 = Swedish 8 = Japanese	Region code; the region code used inside the camera. (see table A-7) 1 - US English
			Item 0 - U.S. English * Item 1 - French Item 2 - German Item 3 - Japanese Item 4 - Simplified Chinese

Auto Rotate Image (rmod)	List	0 = Off 1 = On	Enables or disables auto image rotation (if avail.) 1 - On
			Item 0 - Off Item 1 - On *

Video Mode (saim)	Range	0 = NTSC 1 = PAL	Video mode. 0 - NTSC
			Unsupported parameter

Still Capture (sccl)	List	1 = 24-bit color 2 = 8-bit gray	Still capture options for the bit depth. 1 - 24-bit Color
			Item 0 - Color *

Strobe Compensation(scmp)	Range	-300 - +300	Strobe compensation; measured in 0.01 stop steps. typical = 0
		-200 - 200	Default: 0

Still Compression (scpn)	Range	1 - 6 (Max-None)	Still capture image. Not listed
			Item 0 - High Item 1 - Normal Item 2 - Low * Item 3 - Lossless

Sharpen Image (shpn)	Fixed	0 - 399	Defines the sharpen range in 1 pixel steps. typical = 100
			Unsupported parameter

Shutter Speed (shut)	Range	125 - 4000000	Shutter speed specification; measure in microsecond steps, 16666 being equivalent to 1/60 second. 16666 = 1/60 second
		3076 - 16000000	Default: 500000

Strobe Mode (smod)	List	1 = Auto 2 = Fill 3 = Off 4 = Slave 5 = Sync	Strobe mode specification. 1 - Auto
			Item 0 - Auto * Item 1 - Fill Item 2 - Off Item 3 - Sync

Strobe Precount (spre)	Range	0 - 15	Strobe precount; not supported. Not Supported
		0 - 1	Default: 0

Slide Show Content (sscs)	String	User Defined	Slide show content string. Null
			Unsupported parameter

Slide Show Content (ssct)	List	1 = category 2 = all	Slide show content. 2 - All
			Unsupported parameter

Slide Show Duration(ssdr)	Range	1 - 10	Slide show frame duration in seconds. def = 3 sec
		1 - 99	Default: 3

Slide Show Sound (ssis)	List	0 = off 1 = on	Slide show image sound. 1 - On
			Item 0 - Off Item 1 - On *

Still Capture Size (ssiz)	Range	1 = Full size 2 = 1/4 size 4 = 1/16 size 8 = 1/64 size	Still capture size. 1 - Full
			Item 0 - Standard Item 1 - Medium Item 2 - High * Item 3 - Ultra

Slide Show Loop (sslp)	List	0 = off 1 = on	Slide show loop indicator. 1 - On
			Item 0 - Off Item 1 - On *

Shutter Sound (ssnd)	List	0 = Shutter Sound 1 = Other(TBD)	Selects shutter sound. 0 - Shutter Sound
			Unsupported parameter

Shutter Volume (ssvl)	Range	0 = Sound off 7 = Sound on	Defines shutter sound volume. Cameras may have only one setting. Others may not support sound. In which cases the value should be 0 to 0. 0 - Off
		0 - 1	Default: 1

Self Timer Enable (stim)	List	0 = Off 1 = On	Enables the self timer mode. 0 - Off
			Item 0 - Off * Item 1 - On

Time Lapse Capture (tccl)	List	1 = 24-bit color 2 = 8-bit gray	Time-lapse capture options for bit depth. 1 - 24-bit Color
			Item 0 - Color *

Time Lapse Count (tcic)	Range	5 - 1000	Time-lapse count specifies how many images to capture during the time-lapse period. typical = 30
			Unsupported parameter

Timelapse Capture Count (tcnt)	Range	2 - 1000 images	Sets the maximum number of images to capture for a timelapse. typical = 10
		2 - 1000	Default: 10

Time Lapse Compression (tcpn)	Range	1 - 6 (Max-None)	Time-lapse capture image. Not listed
			Item 0 - High Item 1 - Normal Item 2 - Low * Item 3 - Lossless

Time Lapse Units (tctu)	List	1 = seconds 2 = minutes	Time-lapse capture interval units. 1 - Seconds
			Unsupported parameter

Time Lapse Delay (tctv)	Range	1 - 1500	Sets time-lapse timer delay in 1 second steps. typical = 5 seconds
			Unsupported parameter

Time Format (tfmt)	List	1 = hh:mm a/p 2 = hh:mm:ss a/p 3 = hh:mm 4 = hh:mm:ss	Time format used for entering and editing time values. Used for Watermarks and some display screens. 1 = hh:mm a/p
			Item 0 - 12 Hours/Minutes * Item 1 - 12 Hours/Minutes/Seconds Item 2 - 24 Hours/Minutes Item 3 - 24 Hours/Minutes/Seconds

Timelapse Capture Int.(tldy)	Range	1500 - 8640000	Specifies the time interval between captures. typical = 6000 msec
		6000 - 8640000	Default: 6000

Time Lapse Size (tsiz)	List	1 = Full size 2 = 1/4 size 4 = 1/16 size 8 = 1/64 size	Time-lapse capture size. 1 - Full
			Item 0 - Standard Item 1 - Medium Item 2 - High * Item 3 - Ultra

User Copyright Notice (ucpt)	String	User Entered	Stored in every image file. It allows the user to tag images with a personal copyright notice. Null
		Default:	Current:

Video Output Mode (vmod)	List	1 = NTSC 2 = PAL 3 = SECAM	Sets the video output mode. 1 = NTSC
			Item 0 - NTSC * Item 1 - PAL

White Balance-Blue (wbcb)	Fixed	65536 - 262144	White balance custom blue value. typical = 65536
		16384 - 262144	Default: 65536

White Balance-Green(wbcg)	Fixed	65536 - 262144	White balance custom green value. typical = 65536
		16384 - 262144	Default: 65536

White Balance-Red (wbcr)	Fixed	65536 - 262144	White balance custom red value. typical = 65536
		16384 - 262144	Default: 65536

Watermark Enabled (wena)	Bits	0 - 7 bits 0 = feature off 1 = feature on	Watermark enable. Bit 0 (LSB) controls time/date Bit 1 controls string Wmark Bit 2 controls graphic Wmark therefore: 0 = all off. typical = 0
		0 - 15	Default: 0

White Balance Mode (wmod)	List	1 = Auto 2 = Sun 3 = Cloudy 4 = Fluorescent 5 = Tungsten 6 = Flash 7 = Custom	White balance specification. 1 - Auto
			Item 0 - Auto * Item 1 - Daylight Item 2 - Fluorescent Item 3 - Tungsten Item 4 - Off

Watermark Filename (wpic)	String	User Defined	DOSName (file name) for a PICT watermark; when the string is empty, the feature is off. Null
		Default:	Current:

Wmark Graphics Opr (wpop)	List	0 = SourceCopy 1 = SourceOr	Graphics operation for the PICT watermark. 1 - SourceCopy
			Item 0 - Off/Src Copy * Item 1 - On/Source OR

Wmark X Position (wpxp)	Range	0 - 100 (%)	Indicates the position of the x (horizontal) corner of the PICT watermark relative to the upper left corner. The value is based on percentage. def = 0
		0 - 100	Default: 4

Wmark Y Position (wpyp)	Range	0 - 100 (%)	Indicates the position of the y (vertical) corner of the PICT watermark relative to the upper left corner. The value is based on percentage. def = 0
		0 - 100	Default: 4

Wmk String BG Color (wsbc)	Range	0 - 63	Background color of the string watermark; all colors refer to the system color palette of 64 colors. def = 63
		0 - -1	Default: 8388736

Wmark String FG color (wsfc)	Range	0 - 63	Color of the string watermark; colors refer to the system color palette of 64 colors. def = 0
		0 - -1	Default: -8323200

Wmark String Font (wsfn)	Range	TBD	Font for the string watermark. TBD
			Unsupported parameter

Wmark String Oper. (wsop)	List	0 = SourceCopy 1 = SourceOr	Graphics operation for the string watermark. 0 - SourceCopy
			Item 0 - Opaque Color * Item 1 - Translucent Item 2 - Transparent

Wmark String Text (wstr)	String	User Defined	Text-based watermark; when the string is empty, the feature is off; this string typically goes into the image tags. Null
		Default:	Current:

Wmark String Font (wsts)	Range	TBD	Font size for the string watermark. TBD
			Item 0 - 18 Point * Item 1 - 24 Point Item 2 - 36 Point Item 3 - 48 Point

Wmark X Position (wsxp)	Range	0 - 100 (%)	Indicates the position of the x (horizontal) corner of the string watermark relative to the upper left corner. The valu is based on percentage. def = 0
		0 - 100	Default: 4

Wmark Y Position (wsyp)	Range	0 - 100 (%)	Indicates the position of the y (vertical) corner of the string watermark relative to the upper left corner. The value is based on percentage. def = 0
		0 - 100	Default: 96

Wmark Time BG Color(wtbc)	Range	0 - 63	Background of the time/date watermark; all colors refer to the system color palette of 64 colors. def = 63
		0 - -1	Default: 8388736

Wmark Time FG Color(wtfc)	Range	0 - 63	Color of the time/date Wmark; all colors refer to the system color palette of 64 colors. def = 0
		0 - -1	Default: -8323200

Wmark Time Font (wtfn)	Range	TBD	Font type of the time/date watermark. TBD
			Unsupported parameter

Wmark Time Oper. (wtop)	List	0 = SourceCopy 1 = SourceOr	Graphics operation for the time/date watermark. 0 - SourceCopy
			Item 0 - Opaque Color * Item 1 - Translucent Item 2 - Transparent

Wmark Time Font (wtts)	Range	TBD	Font size for the time/date watermark. TBD
			Item 0 - 18 Point * Item 1 - 24 Point Item 2 - 36 Point Item 3 - 48 Point

Wmark X Position (wtxp)	Range	0 - 100 (%)	Indicates the position of the x (horizontal) corner of the time/date Wmark relative to the upper left corner. The value is based on percentage. def = 0
		0 - 100	Default: 96

Wmark Y Position (wtyp)	Range	0 - 100 (%)	Indicates the position of the y (vertical) corner of the time/date Wmark relative to the upper left corner. The value is based on percentage. def = 0
		0 - 100	Default: 96

Exposure Compensation (xcmp)	Range	-511 - +511	Exposure compensation; measured in 0.01 stop steps. def = 0
		-200 - 200	Default: 0

Exposure Mode (xmod)	List	1 = Auto 2 = Shutter priority 3 = Aperature priority 4 = Gain Priority 5 = Manual	Exposure mode specification. 1 - Auto
			Item 0 - Programmed AE * Item 1 - Long Time Exposure Item 2 - External Flash Sync

Exposure Method (xmtd)	List	1 = Auto matrix 2 = Center spot 3 = Center weighted 4 = Custom	Exposure method specification. 1 - Auto
			Item 0 - Center Weighted *

Zoom Mode (zmod)	List	1 = Motorized 2 = Program 3 = Manual	Specifies the operational mode of the Zoom function. 1 - Motorized
			Item 0 - Motorized Item 1 - Programmed * Item 2 - Manual

Zoom Position (zpos)	Range	100 - 300	Zoom position specification. typically = 100 (no Zoom)
		100 - 300	Default: 130

Zoom Speed (zspd)	Range	75 - 210	Zoom speed spec.; in units per second. For example, 100 = moving from 100 (1x) to 200 (2x) in 1 second. typically = 100
		100 - 100	Default: 100

Audio Volume Control(audv)	Range	1 - 7	Controls the audio volume. typically = 4
			Unsupported parameter

Born on Date (bond)	Value	Camera Defined	Date (in seconds since 1/1/1970 that the camera was powered on after shipping. 0
			Unsupported parameter

Image Color Setting(colr)	List	1 = Full Color 2 = Black&White 3 = Sepia	Specifies the color mode used for image capture. Overrides sccl & tccl 1 - Full Color
			Unsupported parameter

Continuous Mode (cont)	List	0 = Off 1 = On	Activates continuous Still capture. 0 - Off
			Unsupported parameter

Display Brightness (dbrt)	Range	1 - 7	Display Brightness Control. typically = 4
			Unsupported parameter

Eye Start (eyes)	List	0 = On/Minimum 1 = Off/Maximum	Eye Start Control. 0 - On
			Unsupported parameter

Eye Start User Control(eyeu)	List	0 = Off/Minimum 1 = On/Maximum	User enable or disable Eye Start Settings. 1 - On
			Unsupported parameter

Photo Mode Setting (foto)	List	65 = Auto 66 = Portrait 67 = Landscape 68 = Action 69 = Macro 70 = Night 71-74 = P,Av,Tv,M	Reads the current photo mode dial switch position. -
			Unsupported parameter

Hand-Held (hand)	List	0 = Off 1 = On	Disallows long shutter speeds when turned on. 1 - On
			Unsupported parameter

Liveview on (lvon)	List	0 = Off 1 = On	Controls whether LiveView is on or off at power-up and mode changes. 0 - Off
			Unsupported parameter

Overlay Mode (ovly)	List	1 = Std 2 Line 2 = Exp 3 Line	Controls the display of the 3rd line of info in the play mode overlay. 1 - Standard
			Unsupported parameter

Remote shutter enable(rsht)	List	0 = Off 1 = On	Enables remote shutter release; requires remote connected to the serial port. 0 - Off
			Unsupported parameter

Table A-4 Time Format HH:MM = 1 HH:MM:SS = 2 (Time Formats) Example 1:25 PM 1:25:00 PM Table A-5 Date Format Short = 1 Abbrv = 2 WkdayAbbrv = 3 Abbrv = 2 (Date Formats) Example 3/23/95 Mar 23, 1995 Thu, Mar 23, 1995 Mar 23, 1995 Table A-6 Region US English = 1 UK English = 2 French = 3 Italian = 4 Spanish = 5 German = 6 Swedish = 7 Japanese = 8 (Region/Time Formats) Example 1:25 PM 1:25 pm 13:25 13:25 13:25 13:25 Uhr 13:25 13:25 Table A-7 Region US English = 1 UK English = 2 French = 3 Italian = 4 Spanish = 5 German = 6 Swedish = 7 Japanese = 8 (Region/Date Formats) Example 9/19/00 19/9/00 19/9/00 19-09-2000 19/9/00 19.09.2000 00-09-19 9/19/00 It took your device 1:15 to complete this script.