| Product Information |
| (ptid) - Product Name: PENTAX EI-2000
by PENTAX |
| (fwrv) - Firmware Revision: 1.0.4
(c) 2000 FlashPoint Technology
(oerv) - 1.0.4
|
| (hwrv) - Hardware Revision: 1.0.0
Serial: 282134826 |
| (carv) - Control Revision: 1.0.0
Shell: 1.0.0 |
(ucrv) - Universal Command: 1.0.0
| (pchc) - Patch Count: 0
(exsa) - Expansion Slots: 1 | |
| (cpus) - Processor Speed: 9600
Mhz (rams) - Camera RAM: 11 Meg
(hprs) - Host PRAM: 32 |
| You have taken (pcnt) 45
pictures, and the Strobe fired (scnt) 19 times. |
|
Parameter |
Type |
Value |
Description/Default |
|
Analog AGC (aagc) |
Range |
100 - 2047 |
Analog AGC spec.; measured
in 0.01 steps, with 100
equivalent to a gain of 1.0
typical = 100 |
|
|
|
25 - 400 |
Default: 100 |
|
AC Pwrdown Timeout (acpd) |
Range |
5 - 65535 |
Sets the amount of time to
sleep on AC power before
powering down. (in seconds)
typical = 600 (10min) |
|
|
|
5 - 65535 |
Default: 600 |
|
AC Sleep Timeout Enable (acse) |
List |
1 = Enable
2 = Disable
3 = Never Sleep
|
Indicates whether or not
the AC sleep timeout is
enabled.
1 - Enable |
|
|
|
|
Item 0 - Enable *
Item 1 - Disable
Item 2 - Never Sleep |
|
AC Timeout (actc) |
Range |
60 - 4095 |
AC timeout count in
seconds; the inactive time
that elapses before the camera
powers down when it's connected
AC power.
typical = 600 (10min) |
|
|
|
5 - 65535 |
Default: 120 |
|
Auto Exposure Lock (aelk) |
List |
0 = Continuous
1 = AE Lock
|
Automatic exposure lock mode
specification.
0 - Continuous |
|
|
|
|
Item 0 - AE Continuous
Item 1 - AE Lock *
|
|
Auto Focus Lock (aflk) |
List |
0 = Continuous
1 = AF Lock
|
Automatic focus lock mode
specification.
0 - Continuous |
|
|
|
|
Item 0 - AF Lock *
Item 1 - Continuous AF |
|
Aperture Size (aper) |
Range |
100 - 4095 |
Aperature spec.; measured in
0.01 stop steps. (400 = f/4)
typical = 280 (f/2.8) |
|
|
|
200 - 1880 |
Default: 260 |
|
Burst Capture (bccl) |
List |
1 = 24-bit color
2 = 8-bit gray
|
Burst capture options for the
bit depth.
1 - 24-bit Color |
|
|
|
|
Unsupported parameter |
|
Burst Capture Rate (bccr) |
List |
1 = 1/sec
2 = 2/sec
3 = 3/sec
5 = 5/sec
10 = 10/sec
|
Burst capture rate.
typical = 10 /sec |
|
|
|
|
Unsupported parameter |
|
Burst Compression (bcpn) |
Range |
1 - 6 (Max-None) |
Burst capture image compression
Not listed |
|
|
|
|
Unsupported parameter |
|
Burst Capture Size (bsiz) |
Range |
1 = Full size
2 = 1/4 size
4 = 1/16 size
8 = 1/64 size
|
Burst capture size.
typical = 4 (1/16) |
|
|
|
|
Unsupported parameter |
|
Batt Pwrdown Timeout (btpd) |
Range |
5 - 65535 |
Sets the amount of time to
sleep on battery before
powering down. (in seconds)
typical = 480 (8min) |
|
|
|
5 - 65535 |
Default: 300 |
|
Batt Sleep Timeout Enable(btse) |
List |
1 = Enable
2 = Disable
|
Indicates whether or not
the battery sleep timeout
is enabled.
1 - Enable |
|
|
|
|
Item 0 - Enable *
Item 1 - Disable |
|
Batt Timeout (bttc) |
Range |
60 - 1023 |
Battery timeout measured in
seconds; the amount of time
that elapses before the camera
powers down when it's connected
to battery power.
typical = 180 (3min) |
|
|
|
5 - 65535 |
Default: 120 |
|
Camera Folder Name (camf) |
String |
Camera |
The name of the folder where
images are stored.
Null |
|
|
|
Default: CAMERA |
Current: CAMERA |
|
Camera Name (cmne) |
String |
User Defined |
User defined camera name.
Null |
|
|
|
Default: Digita Camera |
Current: Digita Camera |
|
Copyright String (cprt) |
String |
User Defined |
User copyright string; goes
into the image tags.
Null |
|
|
|
|
Unsupported parameter |
|
Processor Speed (cpus) |
Range |
Hardware |
Specifies the speed of the
processor. Defined by
hardware. (in 0.01 MHz)
typical = 4909 (49.09 MHz) |
|
|
|
|
Unsupported parameter |
|
Processor Type (cput) |
List |
1 = Motorola 823
2 = DCAM 101/103
|
Specifies the type of
Processor. Defined by
Hardware.
Hardware |
|
|
|
|
Unsupported parameter |
|
Counter Reset (crst) |
Range |
1 = Reset when empty
2 = Capture counter
|
Counter reset specification.
1 - Reset |
|
|
|
|
Item 0 - Reset When Empty
Item 1 - Continuous Counter *
|
|
Short Date Format (deft) |
List |
1 = MM/DD/YY
2 = DD/MM/YY
3 = YY/MM/DD
|
Specifies the order of entry
for dates in Entry mode and
other uses of the short date
including Watermarks.
1 = MM/DD/YY |
|
|
|
|
Item 0 - MM/DD/YY
Item 1 - DD/MM/YY
Item 2 - YY/MM/DD *
|
|
Date Format (dfmt) |
List |
1 = short
2 = abbreviated
3 = wkday abbrev.
|
Date Format refer to Table A-5.
Based on the set Region Code
(rgnc) Table A-7.
based on Region Code (rgnc) |
|
|
|
|
Item 0 - Short Date *
Item 1 - Abbreviated Date
Item 2 - Long Date |
|
Storage Name (drdn) |
String |
Any |
Default internal storage name;
default value is used whenever
internal storage is initialized
def = Camera |
|
|
|
|
Unsupported parameter |
|
Enable Built-in Scripts(ebrs) |
Bits |
Not currently supported by
any Digita-enabled device.
|
Allows hidden scripts to be
built into the system. Scripts
remain hidden unless enabled
via a script.
typical = 0x0 |
|
|
|
0 - -1 |
Default: 0 |
|
Expansion Slots Avail. (exsa) |
Range |
1 - 3 |
Specifies the number of
expansion slots available.
typical = 1 |
|
|
|
|
Unsupported parameter |
|
Burst Time Interval (fbti) |
Range |
100 - 1000 |
Specifies the time interval
between captures for burst
capture.
typical = 250 msec |
|
|
|
|
Unsupported parameter |
|
Focus Dist (fdst) |
Range |
30 - 65535 |
Focus distance specification;
measured in centimeters,
65535 = infinity.
65535cm (infinty) |
|
|
|
2 - 65535 |
Default: 1000 |
|
File Type (flty) |
List |
32 bit 4 char. Name
PICT (.PIC)
JFIF (.JPG)
EXIF (.EXF)
|
File type selector used when
saving images.
3 - EXF |
|
|
|
|
Item 0 - JPEG *
Item 1 - TIFF |
|
Focus Mode (fmod) |
List |
1 = Auto
2 = Program
3 = Manual
|
Focus mode specification.
1 - Auto |
|
|
|
|
Item 0 - Auto Focus *
Item 1 - Manual Focus |
|
Focus Method (fmtd) |
List |
1 = Auto matrix
2 = Center Spot
3 = Center weighted
4 = Custom
|
Focus method specification.
1 - Auto |
|
|
|
|
Item 0 - Center Spot
Item 1 - Center Weighted *
|
|
Digita Release Date (fwrd) |
Range |
0 - 0xFFFFFF |
Specifies the release date
for the installed version
of the Digita OE.
Units = seconds |
|
|
|
|
Unsupported parameter |
|
Hint Spec (hint) |
List |
1 = Auto
2 = Portrait
3 = Landscape
4 = Closeup
5 = Sports
|
Hint specification.
1 - Auto |
|
|
|
|
Item 0 - Auto *
Item 1 - Portrait
Item 2 - Landscape
Item 3 - Closeup
Item 4 - Sports
Item 5 - Night |
|
Image Capture Tone (icts) |
Range |
Not currently supported by
any Digita-enabled device.
|
Sets the Tone (CrCb) value
to be applied to the image.
typical = 23609 |
|
|
|
0 - 65535 |
Default: 23609 |
|
Image Head (ihtc) |
Range |
0 - 63 |
Image head timeout measured
in seconds; the amount of
time that elapses before camera
powers off the image head and
goes into sleep time.
typical = 8 sec |
|
|
|
0 - 30 |
Default: 8 |
|
Image Info Version (iirv) |
Bits |
0 - 63 |
Specifies the version number
used for image information
file tags.
typical = 0x010001000 |
|
|
|
|
Unsupported parameter |
|
Instant Review (irev) |
List |
0 = off
1 = on
|
Instant Review State.
1 - On |
|
|
|
0 - 3000 |
Default: 300 |
|
Image Sharpness Amount (isam) |
Range |
0 = none
Neg. = Softening(unsharpen)
Pos. = Sharpening.
|
Controls sharpening performed
when the image is captured.
typical = 0 |
|
|
|
-25 - 100 |
Default: 0 |
|
Image Sharpness Radius (isra) |
Range |
0.1 - 10 Units = .1 pixel |
Sets sharpening radius for
image capture.
typical = 0.1 |
|
|
|
6553 - 655360 |
Default: 6553 |
|
Image Sharpness Thresh. (isth) |
Range |
0 - 25 Units = pixels |
Sets sharpening threshhold
for capture.
typical = 4 |
|
|
|
0 - 25 |
Default: 4 |
|
Capture Mode (mcap) |
List |
0 = Still
1 = Burst
2 = Timelapse
|
Defines manual capture mode.
0 - Still |
|
|
|
|
Item 0 - Still *
Item 1 - Timelapse |
|
Macro In/Out (mcro) |
List |
0 = Macro out
1 = Macro in
|
Macro in/out specification;
Out indicates macro not in,
macro In indicates macro is in
position.
0 - Macro out |
|
|
|
|
Item 0 - Normal (0.5m - Infinity) *
Item 1 - Macro (0.02m - 0.6m) |
|
Host Buffer (mhbs) |
Range |
10240 - 65535 |
Maximum host buffer size
in bytes; indicates the block
of data that can be transferred
through one command response to
the host.
typical = 19200 |
|
|
|
10240 - 32768 |
Default: 19456 |
|
Manual Delay Time (mtdy) |
Range |
1 - 63 |
Sets manual delay time in 1
second steps.
typical = 10 sec |
|
|
|
1 - 60 |
Default: 10 |
|
Digita OE Version (oerv) |
Hex |
extended BCD |
Specifies version of the
Digita OE currently running.
typical = 0x010000000 |
|
|
|
|
Unsupported parameter |
|
User Password (pasw) |
String |
Max 31 Chars. |
Used to lock out functions
in scripts.
User Entered |
|
|
|
Default: |
Current: |
|
Burst Playback Rate(pbbr) |
Range |
1 - 10 |
Burst playback rate in seconds.
typical = 3 sec |
|
|
|
1000 - 10000 |
Default: 3000 |
|
Group Playback Rate(pbgr) |
Range |
1 - 10 |
Group playback rate in seconds.
typical = 3 sec |
|
|
|
1000 - 10000 |
Default: 3000 |
|
Print Brightness (pbrt) |
Range |
Not currently supported by
any Digita-enabled device.
|
Sets the relative brightness
of the image.
typical = 0 |
|
|
|
|
Unsupported parameter |
|
Timelapse Playback (pbtr) |
Range |
1 - 10 |
Time-lapse playback rate in
seconds.
typical = 3 sec |
|
|
|
1000 - 10000 |
Default: 3000 |
|
Patch Count (pchc) |
Range |
Not currently supported by
any Digita-enabled device.
|
Specifies how many patches
were applied during boot-up.
typical = 0 |
|
|
|
|
Unsupported parameter |
|
Print Contrast (pcon) |
Range |
Not currently supported by
any Digita-enabled device.
|
Specifies relative adjustment
of contrast.
typical = 0 |
|
|
|
|
Unsupported parameter |
|
Print Copies (pcpy) |
Range |
1 - 50 |
Print copy count specification.
typical = 1 |
|
|
|
1 - 999 |
Default: 1 |
|
Program Shift (pgms) |
Range |
-511 - +511 |
Program shift; measured in 0.01
stop steps.
typical = 0 |
|
|
|
|
Unsupported parameter |
|
Print Layout (play) |
List |
1-4 = 1-4 up
5 = 6 up
6 = 20 up
Not currently supported.
|
Sets the relative brightness
of the image.
1 = 1 up |
|
|
|
|
Unsupported parameter |
|
Printer Name (pnam) |
Range |
1 = PS/Disk
2 = PS/IrDA
|
Printer Name - whether to
create a PS file or send output
through IrDA to printer.
1 - (PS/Disk) |
|
|
|
|
Unsupported parameter |
|
Printer Orient. (port) |
Range |
1 = Portrait
2 = Landscape
|
Print Orientation specification
2 - Landscape |
|
|
|
|
Unsupported parameter |
|
Print Horiz. Shift (posh) |
Range |
Not currently supported by
any Digita-enabled device.
|
Adjusts the Horizontal
offset for printing.
typical = 0 |
|
|
|
|
Unsupported parameter |
|
Print Vert. Shift (posv) |
Range |
Not currently supported by
any Digita-enabled device.
|
Adjusts the Vertical
offset for printing.
typical = 0 |
|
|
|
|
Unsupported parameter |
|
Print Quality (pqly) |
List |
1 = Best
2 = Better
3 = Good
Not currently supported.
|
Adjusts the Quality
for printing.
1 = Best |
|
|
|
|
Unsupported parameter |
|
Print Resize (pres) |
List |
1 = Fit Within
2 = Fill and Clip
3 = Stretch & Fill
Not currently supported by
any Digita-enabled device.
|
Sets the method used for
filling the print rectangle
specified by the play
parameter.
1 = Fit Within |
|
|
|
|
Unsupported parameter |
|
Print Sharpness (psam) |
Range |
Not currently supported by
any Digita-enabled device.
|
Sets sharpening for print.
typical = 0 |
|
|
|
|
Unsupported parameter |
|
Print Saturation (psat) |
Range |
Not currently supported by
any Digita-enabled device.
|
Sets the color saturation
for the print.
typical = 0 |
|
|
|
|
Unsupported parameter |
|
Printer Scale (psci) |
Range |
1 = Full
2 = 1/2
3 = 1/4
4 = fit page
|
Print scale specification.
1 - Full |
|
|
|
|
Unsupported parameter |
|
Printer Selection (psel) |
List |
Not currently supported by
any Digita-enabled device.
|
Sets the destination printer.
typical = 1 |
|
|
|
|
Unsupported parameter |
|
Print Paper Size (psiz) |
List |
1 = US Letter
2 = US Legal
3 = A2
4 = A3
5 = A4
6 = 4X6
7 = Hagaki
Not currently supported
|
Specifies the paper size
for the printer.
1 = US Letter |
|
|
|
|
Unsupported parameter |
|
Print Sharpness Radius (psra) |
Range |
Not currently supported by
any Digita-enabled device.
|
Sets sharpening radius for
print. Standard 'unsharp mask'
functionality.
typical = 0.1 |
|
|
|
|
Unsupported parameter |
|
Print Sharpness Thresh. (psth) |
Range |
Not currently supported by
any Digita-enabled device.
|
Sets sharpening threshhold
for print. Std 'unsharp mask'
functionality.
typical = 4 |
|
|
|
|
Unsupported parameter |
|
Print Paper Type (ptyp) |
List |
1 = Plain
2 = Coated
3 = Glossy
4 = Transparency
Not currently supported by
any Digita-enabled device.
|
Specifies what kind of paper
is being used in the printer.
1 = Plain |
|
|
|
|
Unsupported parameter |
|
Quarter Burst Time Int. (qbti) |
Range |
100 - 1000 |
Specifies the time interval
between captures for 1/4
size burst capture.
typical = 250 msec |
|
|
|
|
Unsupported parameter |
|
RAM Disk Size (rdsz) |
Range |
Not currently supported by
any Digita-enabled device.
|
Sets the size of the internal
RAM disk (in sectors).
typical = 0 sectors |
|
|
|
0 - 0 |
Default: 0 |
|
Region Code (rgnc) |
List |
1 = U.S. English
2 = U.K. English
3 = French
4 = Italian
5 = Spanish
6 = German
7 = Swedish
8 = Japanese
|
Region code; the region code
used inside the camera.
(see table A-7)
1 - US English |
|
|
|
|
Item 0 - English
Item 1 - French
Item 2 - Italian
Item 3 - Spanish
Item 4 - German
Item 5 - Japanese *
|
|
Auto Rotate Image (rmod) |
List |
0 = Off
1 = On
|
Enables or disables auto
image rotation (if avail.)
1 - On |
|
|
|
|
Item 0 - Off
Item 1 - On *
|
|
Video Mode (saim) |
Range |
0 = NTSC
1 = PAL
|
Video mode.
0 - NTSC |
|
|
|
0 - -1 |
Default: 0 |
|
Still Capture (sccl) |
List |
1 = 24-bit color
2 = 8-bit gray
|
Still capture options for the
bit depth.
1 - 24-bit Color |
|
|
|
|
Item 0 - Full *
Item 1 - Gray
Item 2 - Tone |
|
Strobe Compensation(scmp) |
Range |
-300 - +300 |
Strobe compensation; measured
in 0.01 stop steps.
typical = 0 |
|
|
|
-200 - 200 |
Default: 0 |
|
Still Compression (scpn) |
Range |
1 - 6 (Max-None) |
Still capture image.
Not listed |
|
|
|
|
Item 0 - High
Item 1 - Normal *
Item 2 - Low |
|
Sharpen Image (shpn) |
Fixed |
0 - 399 |
Defines the sharpen range in
1 pixel steps.
typical = 100 |
|
|
|
|
Unsupported parameter |
|
Shutter Speed (shut) |
Range |
125 - 4000000 |
Shutter speed specification;
measure in microsecond steps,
16666 being equivalent to 1/60
second.
16666 = 1/60 second |
|
|
|
1000 - 4000000 |
Default: 10000 |
|
Strobe Mode (smod) |
List |
0 = Off
1 = Auto
2 = Fill
3 = Slave
4 = Sync
|
Strobe mode specification.
1 - Auto |
|
|
|
|
Item 0 - Auto *
Item 1 - Fill
Item 2 - Off
Item 3 - Sync |
|
Strobe Precount (spre) |
Range |
0 - 15 |
Strobe precount; not supported.
Not Supported |
|
|
|
0 - 1 |
Default: 0 |
|
Slide Show Content (sscs) |
String |
User Defined |
Slide show content string.
Null |
|
|
|
|
Unsupported parameter |
|
Slide Show Content (ssct) |
List |
1 = category
2 = all
|
Slide show content.
2 - All |
|
|
|
|
Unsupported parameter |
|
Slide Show Duration(ssdr) |
Range |
1 - 10 |
Slide show frame duration in
seconds.
def = 3 sec |
|
|
|
1 - 10 |
Default: 2 |
|
Slide Show Sound (ssis) |
List |
0 = off
1 = on
|
Slide show image sound.
1 - On |
|
|
|
|
Item 0 - Off
Item 1 - On *
|
|
Still Capture Size (ssiz) |
Range |
1 = Full size
2 = 1/4 size
4 = 1/16 size
8 = 1/64 size
|
Still capture size.
1 - Full |
|
|
|
|
Item 0 - Full Size *
Item 1 - 1/4 Size |
|
Slide Show Loop (sslp) |
List |
0 = off
1 = on
|
Slide show loop indicator.
1 - On |
|
|
|
|
Item 0 - Off
Item 1 - On *
|
|
Shutter Sound (ssnd) |
List |
0 = Shutter Sound
1 = Other(TBD)
|
Selects shutter sound.
0 - Shutter Sound |
|
|
|
1 - 1 |
Default: 1 |
|
Shutter Volume (ssvl) |
Range |
0 = Sound off
7 = Sound on
|
Defines shutter sound volume.
Cameras may have only one
setting. Others may not support
sound. In which cases the value
should be 0 to 0.
0 - Off |
|
|
|
0 - 1 |
Default: 1 |
|
Self Timer Enable (stim) |
List |
0 = Off
1 = On
|
Enables the self timer mode.
0 - Off |
|
|
|
|
Item 0 - Off *
Item 1 - On |
|
Time Lapse Capture (tccl) |
List |
1 = 24-bit color
2 = 8-bit gray
|
Time-lapse capture options for
bit depth.
1 - 24-bit Color |
|
|
|
|
Item 0 - Color *
Item 1 - Gray
Item 2 - Tone |
|
Time Lapse Count (tcic) |
Range |
5 - 1000 |
Time-lapse count specifies how
many images to capture during
the time-lapse period.
typical = 30 |
|
|
|
|
Unsupported parameter |
|
Timelapse Capture Count (tcnt) |
Range |
2 - 1000 images |
Sets the maximum number
of images to capture for
a timelapse.
typical = 10 |
|
|
|
2 - 1000 |
Default: 2 |
|
Time Lapse Compression (tcpn) |
Range |
1 - 6 (Max-None) |
Time-lapse capture image.
Not listed |
|
|
|
|
Item 0 - High
Item 1 - Normal *
Item 2 - Low |
|
Time Lapse Units (tctu) |
List |
1 = seconds
2 = minutes
|
Time-lapse capture interval
units.
1 - Seconds |
|
|
|
|
Unsupported parameter |
|
Time Lapse Delay (tctv) |
Range |
1 - 1500 |
Sets time-lapse timer delay in
1 second steps.
typical = 5 seconds |
|
|
|
|
Unsupported parameter |
|
Time Format (tfmt) |
List |
1 = hh:mm a/p
2 = hh:mm:ss a/p
3 = hh:mm
4 = hh:mm:ss
|
Time format used for entering
and editing time values.
Used for Watermarks and some
display screens.
1 = hh:mm a/p |
|
|
|
|
Item 0 - 12 Hours/Minutes
Item 1 - 12 Hours/Minutes/Seconds
Item 2 - 24 Hours/Minutes *
Item 3 - 24 Hours/Minutes/Seconds |
|
Timelapse Capture Int.(tldy) |
Range |
1500 - 8640000 |
Specifies the time interval
between captures.
typical = 6000 msec |
|
|
|
1500 - 8640000 |
Default: 1500 |
|
Time Lapse Size (tsiz) |
List |
1 = Full size
2 = 1/4 size
4 = 1/16 size
8 = 1/64 size
|
Time-lapse capture size.
1 - Full |
|
|
|
|
Item 0 - Full *
Item 1 - 1/4 |
|
User Copyright Notice (ucpt) |
String |
User Entered |
Stored in every image file.
It allows the user to tag
images with a personal
copyright notice.
Null |
|
|
|
Default: |
Current: |
|
Video Output Mode (vmod) |
List |
1 = NTSC
2 = PAL
3 = SECAM
|
Sets the video output mode.
1 = NTSC |
|
|
|
|
Item 0 - NTSC *
Item 1 - PAL |
|
White Balance-Blue (wbcb) |
Fixed |
65536 - 262144 |
White balance custom blue
value.
typical = 65536 |
|
|
|
16384 - 261488 |
Default: 65536 |
|
White Balance-Green(wbcg) |
Fixed |
65536 - 262144 |
White balance custom green
value.
typical = 65536 |
|
|
|
16384 - 261488 |
Default: 65536 |
|
White Balance-Red (wbcr) |
Fixed |
65536 - 262144 |
White balance custom red
value.
typical = 65536 |
|
|
|
16384 - 261488 |
Default: 65536 |
|
Watermark Enabled (wena) |
Bits |
0 - 7 bits
0 = feature off
1 = feature on
|
Watermark enable.
Bit 0 (LSB) controls time/date
Bit 1 controls string Wmark
Bit 2 controls graphic Wmark
therefore: 0 = all off.
typical = 0 |
|
|
|
0 - 15 |
Default: 0 |
|
White Balance Mode (wmod) |
List |
1 = Auto
2 = Sun
3 = Cloudy
4 = Fluorescent
5 = Tungsten
6 = Flash
7 = Custom
|
White balance specification.
1 - Auto |
|
|
|
|
Item 0 - Auto *
Item 1 - Daylight
Item 2 - Tungsten
Item 3 - Fluorescent
Item 4 - 5500K |
|
Watermark Filename (wpic) |
String |
User Defined |
DOSName (file name) for a PICT
watermark; when the string
is empty, the feature is off.
Null |
|
|
|
Default: |
Current: |
|
Wmark Graphics Opr (wpop) |
List |
0 = SourceCopy
1 = SourceOr
|
Graphics operation for the PICT
watermark.
1 - SourceCopy |
|
|
|
|
Item 0 - SrcCopy *
Item 1 - SrcOr |
|
Wmark X Position (wpxp) |
Range |
0 - 100 (%) |
Indicates the position of the x
(horizontal) corner of the PICT
watermark relative to the upper
left corner. The value is based
on percentage.
def = 0 |
|
|
|
0 - 100 |
Default: 4 |
|
Wmark Y Position (wpyp) |
Range |
0 - 100 (%) |
Indicates the position of the y
(vertical) corner of the PICT
watermark relative to the upper
left corner. The value is based
on percentage.
def = 0 |
|
|
|
0 - 100 |
Default: 96 |
|
Wmk String BG Color (wsbc) |
Range |
0 - 63 |
Background color of the string
watermark; all colors refer
to the system color palette of
64 colors.
def = 63 |
|
|
|
0 - -1 |
Default: 8388736 |
|
Wmark String FG color (wsfc) |
Range |
0 - 63 |
Color of the string watermark;
colors refer to the system
color palette of 64 colors.
def = 0 |
|
|
|
0 - -1 |
Default: -8323200 |
|
Wmark String Font (wsfn) |
Range |
TBD |
Font for the string watermark.
TBD |
|
|
|
|
Unsupported parameter |
|
Wmark String Oper. (wsop) |
List |
0 = SourceCopy
1 = SourceOr
|
Graphics operation for the
string watermark.
0 - SourceCopy |
|
|
|
|
Item 0 - Opaque *
Item 1 - Semi
Item 2 - Clear |
|
Wmark String Text (wstr) |
String |
User Defined |
Text-based watermark; when the
string is empty, the feature is
off; this string typically goes
into the image tags.
Null |
|
|
|
Default: |
Current: |
|
Wmark String Font (wsts) |
Range |
TBD |
Font size for the string
watermark.
TBD |
|
|
|
|
Item 0 - 16 Point
Item 1 - 18 Point
Item 2 - 20 Point
Item 3 - 24 Point
Item 4 - 36 Point *
|
|
Wmark X Position (wsxp) |
Range |
0 - 100 (%) |
Indicates the position of the x
(horizontal) corner of the
string watermark relative to
the upper left corner. The valu
is based on percentage.
def = 0 |
|
|
|
0 - 100 |
Default: 96 |
|
Wmark Y Position (wsyp) |
Range |
0 - 100 (%) |
Indicates the position of the y
(vertical) corner of the string
watermark relative to the upper
left corner. The value is based
on percentage.
def = 0 |
|
|
|
0 - 100 |
Default: 96 |
|
Wmark Time BG Color(wtbc) |
Range |
0 - 63 |
Background of the time/date
watermark; all colors refer
to the system color palette
of 64 colors.
def = 63 |
|
|
|
0 - -1 |
Default: 8388736 |
|
Wmark Time FG Color(wtfc) |
Range |
0 - 63 |
Color of the time/date Wmark;
all colors refer to the system
color palette of 64 colors.
def = 0 |
|
|
|
0 - -1 |
Default: -8323200 |
|
Wmark Time Font (wtfn) |
Range |
TBD |
Font type of the time/date
watermark.
TBD |
|
|
|
|
Unsupported parameter |
|
Wmark Time Oper. (wtop) |
List |
0 = SourceCopy
1 = SourceOr
|
Graphics operation for the
time/date watermark.
0 - SourceCopy |
|
|
|
|
Item 0 - Opaque *
Item 1 - Semi
Item 2 - Clear |
|
Wmark Time Font (wtts) |
Range |
TBD |
Font size for the time/date
watermark.
TBD |
|
|
|
|
Item 0 - 16 Point
Item 1 - 18 Point
Item 2 - 20 Point
Item 3 - 24 Point
Item 4 - 36 Point *
|
|
Wmark X Position (wtxp) |
Range |
0 - 100 (%) |
Indicates the position of the x
(horizontal) corner of the
time/date Wmark relative to the
upper left corner. The value is
based on percentage.
def = 0 |
|
|
|
0 - 100 |
Default: 96 |
|
Wmark Y Position (wtyp) |
Range |
0 - 100 (%) |
Indicates the position of the y
(vertical) corner of the
time/date Wmark relative to the
upper left corner. The value is
based on percentage.
def = 0 |
|
|
|
0 - 100 |
Default: 4 |
|
Exposure Compensation (xcmp) |
Range |
-511 - +511 |
Exposure compensation; measured
in 0.01 stop steps.
def = 0 |
|
|
|
-300 - 300 |
Default: 0 |
|
Exposure Mode (xmod) |
List |
1 = Auto
2 = Shutter priority
3 = Aperature priority
4 = Gain Priority
5 = Manual
|
Exposure mode specification.
1 - Auto |
|
|
|
|
Item 0 - Auto *
Item 1 - Shutter Priority
Item 2 - Aperture Priority
Item 3 - Programmed
Item 4 - Manual |
|
Exposure Method (xmtd) |
List |
1 = Auto matrix
2 = Center spot
3 = Center weighted
4 = Custom
|
Exposure method specification.
1 - Auto |
|
|
|
|
Item 0 - Average *
Item 1 - Center-Weighted
Item 2 - Spot |
|
Zoom Mode (zmod) |
List |
1 = Motorized
2 = Program
3 = Manual
|
Specifies the operational
mode of the Zoom function.
1 - Motorized |
|
|
|
|
Item 0 - Programmed *
|
|
Zoom Position (zpos) |
Range |
100 - 300 |
Zoom position specification.
typically = 100 (no Zoom) |
|
|
|
100 - 300 |
Default: 100 |
|
Zoom Speed (zspd) |
Range |
75 - 210 |
Zoom speed spec.; in units
per second. For example, 100 =
moving from 100 (1x) to 200
(2x) in 1 second.
typically = 100 |
|
|
|
|
Unsupported parameter |
Table A-4
Time Format
HH:MM = 1
HH:MM:SS = 2
|
(Time Formats)
Example
1:25 PM
1:25:00 PM
|
Table A-5
Date Format
Short = 1
Abbrv = 2
WkdayAbbrv = 3
Abbrv = 2
|
(Date Formats)
Example
3/23/95
Mar 23, 1995
Thu, Mar 23, 1995
Mar 23, 1995
|
Table A-6
Region
US English = 1
UK English = 2
French = 3
Italian = 4
Spanish = 5
German = 6
Swedish = 7
Japanese = 8
|
(Region/Time Formats)
Example
1:25 PM
1:25 pm
13:25
13:25
13:25
13:25 Uhr
13:25
13:25
|
Table A-7
Region
US English = 1
UK English = 2
French = 3
Italian = 4
Spanish = 5
German = 6
Swedish = 7
Japanese = 8
|
(Region/Date Formats)
Example
9/19/00
19/9/00
19/9/00
19-09-2000
19/9/00
19.09.2000
00-09-19
9/19/00
|
It took your device 1:25 to complete this script.
|
|